Length of metal hose installation priority

Metal hoses need to be fully flexible supply lines, preventing vibration of piping flexed their muscles in the premises, on air, steam, gas, heavy oil, oil, chemicals and other industries made important contributions. High pressure steel wire braided hose highly adaptive to the environment, but is not installed correctly, will reduce their life expectancy, resulting in a large part of the waste. In the installation of metal hose, length is the primary consideration:

Usually the metal hose can be divided into three different lengths: the first type is a compressed length, is the length of the steel wire spiral rubber hose is compressed to the limit position;

No. 2 is installation length, which is the maximum displacement amount in an intermediate position of the half length of the hose;

No. 3 is stretching the length of the hose is stretched to the limit when the maximum length. Metal hose when the hose is installed in the middle position, the so-called installation length. In this position the mounted state, the hose may have been two moving direction axial load, or if the move to only one direction, will affect the strength of the steel wire braided hydraulic hose, reducing service life.

In the actual installation process, taking into account the results of using a ruler to the amount calculated in accordance with the length of hose before installation can affect productivity, and some foreign producers ruler is installed directly on the hose, ruler cut off after the install. Fiber reinforced hydraulic hose  can be installed horizontally, can also be mounted vertically or diagonally installed, the ideal state is mounted vertically, and should be avoided in the vicinity of the wheels, The baffle can be installed, if necessary.

To learn more about high pressure rubber hose series expertise, visit our website: http://www.eilifen.com/

Related Reading: wire winding drilling hose, steel wire braided hydraulic hose , rubber compression molding