"PVC steel wire hose" introduction and kinds of PVC hose

PVC steel wire hose is what? In fact, PVC reinforced material is built using the latest, whether under pressure or in its hardness is a very good upgrade, can replace the ordinary rubber hose, PE and part of the metal tubes. PVC steel wire hose machine is widely used in chemical, defense, manufacturing and other industries, has become one of the most used products. PVC steel wire hose has a lot of categories, different types are applied in different ways. So what is the PVC steel wire hose pipe, PVC wire classification hose, what does? Let's take a look.

What PVC steel wire hose:

PVC wire hose is we often said of PVC wire enhanced tube, its pipe for three layer structure, both inside and outside two layer is PVC soft quality plastic, Middle a layer is wire enhanced structure, or is wire network or is spiral wire, so its formed of pipe also on has several call: PVC wire tube, and PVC wire enhanced tube, and PVC wire spiral enhanced tube, and PVC wire network enhanced hose, and PVC wire network hose,. Enhanced wire layer actually increases resulting in a PVC pipe in intensity, wind resistant, quality of certain changes took place, such as modified or reinforced PVC pipes.

PVC steel wire tube is a new PVC reinforced materials, resilience and hardness have a very good improvement. Heavy is the most important means of production in the steel tube, which markets major types of steel pipe in high pressure steel pipe, low pressure steel pipe, tube and wire skeleton transparent steel pipe, used in different environments in different ways, the new PVC steel wire tube is now the most widely used products.

PVC wire classification hose:

PVC steel wire hose china according to the purpose can be divided into five categories, namely threaded hose, water hose, shower hose, ventilation hoses and wiring harness duct. Thread hose is most widely used, it is made of galvanized steel, stainless steel and plastic materials produced by, with good flexibility, bending and good carrying capacity; glossy surface, high temperature resistance, corrosion resistance, etc. Thread hose even with foot, fracture and deformation does not occur, quickly restored the status quo ante, and the hose does not have any injury.

PVC spiral steel wire reinforced hose in accordance with the material can be divided into stainless steel, metal, bellows, rubber and plastics. Flexible stainless steel hose, resistant to corrosion and temperature, but also has some shielding. Often used as an automatic protection device of signal wires. Metal hose into two categories, namely spiral corrugated tube and bellows ring. Often uses a spiral-shaped bellows. The corrugated hose can be connected together with a spiral. Bellows ring compared with spiral corrugated tube, length is shorter, but has good flexibility. Corrugated hose with light weight, resistance to extreme weather, corrosion characteristics, can also absorb energy, play the role of shock absorption silencers, often used in liquid transportation system.

PVC steel wire braided hose is what, and PVC wire classification hose what related content, small today to share with you so much. Presumably everyone for PVC wire hose are not strange has, General to, it can is divided into two class, regardless of is which type of PVC wire hose, are has high elastic, and resistance high temperature, and resistance corrosion and good of flexible sex, features, and they of using life are is long, is a performance ideal, uses widely of hose, so everyone in select of when, small series recommends select PVC wire hose.

PVC steel wire reinforced hose sizes

TS-type PVC steel wire reinforced hose:
Uses:
1, oil suction pipe
2, factory powder straws
3, factory drains
Features:
1, can be used as vacuum tube
2, clean and transparent (see fluid in the tubes)
3, nontoxic
4, plastic tube is marked with a scale (a-m)

Welcome to http://www.eilifen.com/

Related Reading: PVC steel wire reinforced hose extrusion line, PVC spiral steel wire reinforced hose extrusion line, PVC steel wire reinforced hose manufacturers

Benefits of High Pressure Rubber Hose

Life or industrial production, we often use high pressure rubber hose. Because of its softness is better, so by using various industries like, then we know how much the rubber hose for high pressure? Here take a look!

A high pressure rubber brake hose is different from industrial hoses sold outside. The product is specifically designed to withstand high pressure. As such, this specific design makes a valuable element for use in tunnels, crusher zones, irrigation dams, road construction and rock drilling mines.

The idea behind this technology is to assist spray and welding applications and pulverized chemicals transportation. In addition, air pipes that are generally found in pneumatic system also make use of this design. If you are looking to buy this product then it would be advisable that you learn about its technology online or through some specific books available in the market. There are many industrial rubber hoses manufacturers that provide quality products to the clients based across the country.

A lot of efforts is made to achieve high end design that will aid in easy transportation. For this reason, most of them are made light weight and weather or toxic chemical resistant for higher efficiency and higher durability features. Due to these factors, the product does not react with oxidation and constant temperature changes. This way the range becomes a long term investment as you do not have to replace or remove them frequently.

Such rubber reinforced hoses are sturdier and stiffer than the conventional counterpart. These can be attached to a machine or device very easily. It is made of natural latex that is also called synthetic rubber. However, a manufacturer can use other materials as well to make this range. That is why it is important to learn about the different parameters such as size, strength and the purpose for which it is made for optimum utility. Many of them are made up of silicone, plastic or other specialized artificial materials that are equally effective when used. These are made for long term benefits like lower maintenance and operation cost.

Latest market updates reveal that natural latex hoses have their own benefits. They are widely appreciated for having great elasticity and the ability to withstand high pressure and temperatures. Most importantly these can be made using fewer resources as compared to man-made materials. In this case, Industrial rubber hoses manufacturers supply them in bulk quantity to the seekers. They manufacture them as per national & international industry guidelines and in different specifications to meet the diverse requirements of their domestic clients. These exhibit remarkable features that make them the number choice of high pressure flexible rubber hoses customers in the market.

Eilifen commitment to high quality services is our commitment to our clients. Advanced equipment, first-class product quality. Scientific management. http://www.eilifen.com/
Related Reading: high pressure hydraulic rubber hose, high pressure rubber hose suppliers , high pressure rubber hose clamps

Entry solid brass door hardware

"Solid brass door hardware" is a kind of deep meaning of his works, it is not just a building material, or a work of art, and its content and as a raw material of copper are inseparable.

Solid brass door hardware is an elegant and durable way to update your existing hardware while creating new and beautiful themes throughout your house. Depending on your specific needs solid brass door hardware can include doorknob sets, hinges, kick plates, and push and pull plates. Exterior door hardware can also include brass door knockers, brass mail slots and brass door bells. Solid brass hardware offers a wide variety of patterns and designs that can be incorporated further into your home on cabinets and drawers and is available in several finishes to match your current hardware.

Purple Glass Door Knobs Solid brass door hardware is a timeless addition to any home. This style can be extremely simple and traditional or extremely ornate. Solid brass offers a versatility that most materials cannot. It is also an easy way to create a common theme throughout your house. Solid brass hardware is available in several finishes including Polished Brass, Antique Brass, Oil Rubbed Bronze, Polished Chrome and Satin Nickel.

Solid brass entry door hardware is produced today – allowing you to incorporate new patterns into your home and specifically your interior and exterior doors. This hardware can transform your home into a showpiece but be sure to follow a few simple steps. First, use solid brass hardware on every door in your house (inside and out) to create a common theme. By using similar designs or patterns. You can further tie the look together. Second, be sure to replace other worn hardware in your home, such as cabinet knobs and drawer pulls, with coordinating brass hardware. By adding these simple touches you can completely update the look of any room.

Solid brass interior door hardware is readily available online as well as in many home decorating catalogs. Search for solid brass (not brass plated) construction and be sure to ask questions. When you work with solid brass hardware you can be sure of high quality construction and durability over time. Different shapes and combinations will work together nicely but a common pattern will help create a unified theme in different rooms. This door hardware is available online through Hipire and they offer free design assistance and design help. http://www.hipire.com/

Hipire from the price, evaluation, sales of departure for your selection of hardware, a variety of styles, as well as related products, quality assurance, courteous service. http://www.hipire.com/


Related Reading: solid brass pocket door hardware , solid brass screen door hardware, solid brass door hardware importers

Why choose brass switch plate?

Brass switch plate is to ensure smooth current, reduce heat critical components. Excellent quality brass switch plate are made of high quality copper, oxidation resistance, toughness, thick copper, less riveting, the four indicators to judge whether or not the high-quality solid brass switch plate covers.

1, thick copper, to enhance the current carrying capacity, reducing its copper resistance;

2, toughness, especially applied to the socket portion, not deformed. Even long-term use, but also to maintain the proper clamping force to ensure tight connection of the plug insert set, reducing the arc; antique brass switch plate covers.

3, anti-oxidation, rust, resistance increases and reduce problems due to corrosion caused by heat;

4, less riveting, preferably an integral piece of copper, to further reduce the breakage and rivet riveting part fevers.

Consider the thickness of vintage brass switch plate covers, if not open the product visually, can be simple hand weigh the weight of the way. More adequate amount of copper, the heavier the weight of the socket.

At Hipire, we understand and appreciate the quality requirements from higher level market. Our strategic intention is providing the best quality products and service to high level customers, who stay with premium images and brands. Our team hold great experiences in brass forging, brass die casting, brass stamping, molding, CNC machining, surface finishing, packaging.

Hipire is capable to provide aggressively on new products development, efficiency production and excellent performances of a good royal manufacturer can be. Sincerely welcome from all over the world and look forward to establishing solid business relations between us.

Related Reading: brass switch plate cover, brushed brass switch plate covers, polished brass switch plate covers

Main applications of high-pressure hose range

HEBEI EILIFEN rubber co., LTD is a professional manufacturer of high pressure hose manufacturer, high pressure hose in the real application in all walks of life, then we will introduce the high pressure hose is used in which:

(1) The coal industry: the main pipeline of the coal industry are powered hose. Some coal mine hydraulic support's pressure had increased, High pressure steel wire braided hose does not meet its performance requirements, requirements using steel wire spiral tubing. In addition, for the prevention of pollution from coal dust in underground coal mining process and improve production safety, increases the variety of tubing for coal mining, such as coal-bed methane water sealed telescopic tubing, used before a face in coal mine fully mechanized mining of coal seam water injection and Grouting operations.

(2) The oil industry: in 21st century in China's offshore oil development strategy focused on the development of offshore and shallow sea oilfield, so outside of using vibration of drill pipe, tubing, oil industry, requires the use of shallow-water oil pipe. Shallow sea submarine oil pipeline, China has produced, but float or semi-floating oil pipeline and the deep seabed oil pipeline continues to rely on imports. With the implementation of the development strategy of China National offshore oil, offshore oil extraction requirements for pipe performance will continue to improve.

(3) metallurgical industries: iron and steel equipment used in the production process of continuous casting equipment into electric thermal furnace and converter in converter, acid and alkali resistant rubber hose is a must at the request of armored appearance, used to cool the insulation resistance burning, use of pump and pumping station, in addition to qualifying the pressure, is the aging resistance to meet the requirements.

(4) Water Conservancy: Twelve-Five top documents and through water on the motion, invested more than 1 trillion yuan reforms, which in the case of water especially during negative pressure, skeleton High pressure steel wire spiral rubber hose to show their strengths, long service life, easy to carry.

HEBEI EILIFEN rubber co., LTD provide high quality products, the production of high pressure hose products. Http://www.eilifen.com/

Related Reading: steel wire spiral rubber hose, Marine high pressure oil hose, rubber compression molding 

What are the advantages of brass door handles

Brass Door handle can destroy germs. Some people like to use a beautiful stainless steel door handle, because it looks very clean, reassuring, but the reality is not the case.

United States scientists study, stainless steel door handles can breed thousands of germs, including Gram positive and negative bacteria, such as Escherichia coli and Streptococcus bacteria. Expert on Brass Door Lever for the same test, results were surprising: brass padlock with bacteria on the hands is much less than the stainless steel handle.

In other words, the role of copper have destroy bacteria. The experts carried out repeated experiments on measuring the speed of copper bacterial death. Results on the brass door knob bacteria in 7 hours or less have all been wiped out, and the new polished brass finish, "war of annihilation" in less than one hour, requiring only 15 minutes. Therefore, experts recommended to protect public health and the environment, especially as hospitals, shops, airports, stations such places is best to use a Brass Door handle with estate style.


Round brass Door Knob can destroy germs secret is: pure copper itself and the low pH environment prone to chemical reactions in the air to form a thin film, this film has a layer of copper to prevent the continuing role of chemical reactions, which is after the chemical reaction layer to the film plays an inhibitory effect on bacteria, because people's sweat has a complex composition, these complex components left in the brass door handles surface, chemical reactions can occur with copper,


Can generate: copper oxide; sulfate; copper hydroxide and the like. People in contact with High End Brass Door Knockers left bacteria while leaving the sweat, the result of bacteria on the surface of the brass, but lost the living conditions, will die in a short time, but on one condition: that Brass Door Knob with hexagonal style must always kept clean, in order to generate an effective film, and rusty brass knob as is the breeding ground for bacteria, so use copper handle locks should regularly wipe, clean the lock surface.

Learn Hipire, better purchase and use of brass fittings. http://www.hipire.com

Related Reading: Brass Door Knob with hexagonal style, High End Brass Door Knockers , Brass Door handle with estate style

Length of metal hose installation priority

Metal hoses need to be fully flexible supply lines, preventing vibration of piping flexed their muscles in the premises, on air, steam, gas, heavy oil, oil, chemicals and other industries made important contributions. High pressure steel wire braided hose highly adaptive to the environment, but is not installed correctly, will reduce their life expectancy, resulting in a large part of the waste. In the installation of metal hose, length is the primary consideration:

Usually the metal hose can be divided into three different lengths: the first type is a compressed length, is the length of the steel wire spiral rubber hose is compressed to the limit position;

No. 2 is installation length, which is the maximum displacement amount in an intermediate position of the half length of the hose;

No. 3 is stretching the length of the hose is stretched to the limit when the maximum length. Metal hose when the hose is installed in the middle position, the so-called installation length. In this position the mounted state, the hose may have been two moving direction axial load, or if the move to only one direction, will affect the strength of the steel wire braided hydraulic hose, reducing service life.

In the actual installation process, taking into account the results of using a ruler to the amount calculated in accordance with the length of hose before installation can affect productivity, and some foreign producers ruler is installed directly on the hose, ruler cut off after the install. Fiber reinforced hydraulic hose  can be installed horizontally, can also be mounted vertically or diagonally installed, the ideal state is mounted vertically, and should be avoided in the vicinity of the wheels, The baffle can be installed, if necessary.

To learn more about high pressure rubber hose series expertise, visit our website: http://www.eilifen.com/

Related Reading: wire winding drilling hose, steel wire braided hydraulic hose , rubber compression molding

Dying Chinese folk handicraft brass craft

In the streets of China, walk if you look carefully, you will find there's a shabby old stores, the old man at the door, has been hammering approached found that elderly are a folk art brass craft master, he is doing a brass lighting parts.

To sit down and chat masters brass art, old master had learned of this craft is the fourth generation heir, in this old shop habitat has been 30 years of history. According to the old master introduction, this Brass Mail Slots For Doors all the technical processes are him complete, including prototype sanding, welding, burning, polishing are carried out in the old store. See a finished, and on this ground range of grinding tools, we exclaimed, exquisite craft of the old master.

In fact, other places also have such brass production, but are industrialization, and manual contrast, the industrialization of brass, its durability and resistance to kick better than handmade. But if in the future no one inherited this craft, and also the only industrial production.

Old artist where we learned this art of handmade brass products, has been rare in China, and the traditional production techniques, he has only one. His basic work 12 hours a day, he loves this art, from the previous thirty years now, never stopped, but he did not craft tradition, because this door too hard skills, today's young people no one is willing to go learn.

Now 8090 after many of this generation have forgotten such a Brass Building Hardware, this traditional handicraft awareness is relatively weak, let alone to inherited this craft things. However, a city traditional things, and precious, we need to develop a deeper understanding and not let the traditional things sleep.

Hipire has been to provide you with many kinds of high quality brass fittings, so that small accessories decorate customers' lives! Welcome to visit:  http://www.hipire.com/

Related Reading: Premium Door Knocker Manufacturer, High End Brass Door Knockers , Brass Ball Catches Online

How to make stainless steel pipes as new!

Now many families are installing high pressure hydraulic hose , the preference is stainless steel pipes. Because they think the stainless steel pipes is not that easy to rust, use a relatively long time. In fact, the idea is not entirely correct, stainless steel pipes are not rusty, doesn't mean it will never rust. If not take maintenance measures in daily life, it will rust very quickly, and shorten the life span.

Recommend some tips to gamble your stainless steel pipes clean like new
Stainless steel water pipe maintenance methods are as follows:
1, daily life as little as possible in the soy sauce, oil and other substances into the stainless steel pipes, because both are susceptible to chemical reactions, can cause stainless steel to Rusty pipes.
2, before the installation of hydraulic rubber hose , you can pipe the surface coated with vegetable oil, then use the proper temprature slightly dry. This is done to extend the life of stainless steel pipes, and is easy to clean.
3, if the outer layer of stainless steel pipes already has signs of rust, will rust in time apply specifically for rust stainless steel wax after wax after a period of time, it can be sanded and cleaned. Finish up the wax clean pipe surface and heavy-for-glory.
4, daily life, try not to use a sharp object to collision of stainless steel pipes.
5, in the large diameter water hose for transport, packaging and water pipes fixed, so as to avoid collision between pipes and water pipes, or other sharp objects, so easy to make the pipe surface indentation, not beautiful.
6, once the stainless steel pipe outer layer is scratched, can be coated with stainless steel care agent with a dry towel, then wipe the scratched places, wipe gently with a grinding wheel grinding until the scratch disappears.
7, to restore surface gloss has a method of steel wire spiral rubber hose is: wash stainless steel detergent onto the surface with a soft cloth, the hose will immediately become bright. But this does not always work, often used, might not be to restore original luster of the pipe. For maintenance of stainless steel pipes according to the above method can not only make your home's water pipes to keep bright as new, can save you a small fee.

Why? because maintenance of the above methods, besides useful for stainless steel pipes, and for other stainless steel utensils also works. Frequently so I don't have to spend money to replace the stainless steel utensils, so why not?

Silicone rubber products , is the best direct-drinking water delivery pipes. It has a very low leakage rate can save valuable water resources. HEBEI EILIFEN rubber co., LTD. in order to provide you with high quality products http://www.eilifen.com/

Related Reading: water pipe material , silicone rubber products , rubber compression molding

Ultrahigh-pressure hose instructions for use

Super high pressure hose application: mainly used in the automotive industry, engineering machinery, hoisting and conveying machinery of high voltage transmission fluid transmission, high pressure spray hose. Ultra high pressure hose in a part of daily life is essential, many places have used it.

High pressure hoses are divided into: fiber-reinforced polyurethane hose, fiber-reinforced nylon hose, wire-reinforced polyurethane hose, wire wrapping, wire-reinforced nylon hose entangled resin hose, food grade hose. Aging function, resistance to heat and high pressure, high pulse function.

Function: has good oil resistance.

Super high pressure hose features: looks smooth, small bending radius, is the minimum burst pressure hose working pressure 3 times, high pressure hose functions has good oil resistance, resistance to heat and excellent function of aging, high pressure and pulsed.

If you are interested you can visit:  http://www.eilifen.com/  - High pressure steel wire braided hose main companies!

Related Reading: High pressure steel wire braided hose, rubber compression molding  , Large diameter dredging hose

Resistant to oils and food grade hose index description

HEBEI EILIFEN rubber co., LTD provides of all steel wire spiral rubber hose are meet FDA standard, reached USP,ISO and EP standard, surface smooth gloss good, and easy bent, and resistance pressure easily deformation, and acid alkali, resistance high temperature, easily frozen crack anti-aging; should for gas environment as steam and hot air, welding smoke,, meet has mechanical, and oil, and chemical, and defense industry, and manufacturing, industry on new pipe of needs.

Food grade hose by the positive response of many manufacturers using after effects, transparent silicone hose is easy to observe the fluid in pipes running condition and solved in the rubber hose rubber aging loss problem, is a new generation of ideal fluid conveying hoses, performance indicators have reached the international advanced level.

Oil resistant hose performance indicators Description:

1. The oil performance, is 15-20 times that of flexible duct hose, oil resistance;

2. good wear resistance, abrasion resistance is 30-50 times that of natural rubber;

3. Resistant to aging, five times the anti-aging properties of high pressure rubber hose ;

4. Resistance to tensile strength is 3 times of natural rubber

5. With high flexibility, high elongation, high strength;

6. The damping performance is good, smooth wall, small fluid resistance, low hydraulic losses;

7. beautiful appearance, small bending radius of the hose, non-toxic and tasteless, impact resistance, fatigue resistance, light and flexible, High pressure steel wire braided hose weight is thirty to 70 percent;

8. natural resistance, non-toxic and tasteless; impact resistance, fatigue resistance, safe and reliable.

Related Reading: Marine high pressure oil hose, Large diameter water hose, steel wire spiral rubber hose

Metal hose selection of raw materials

Metal hose materials are generally divided into three categories:
Class A material:: refers to the use in the production process, may have a direct and significant impact (such as the product key features, performance can have a direct impact) on the quality of raw materials.

Class B material: refers to the use in the production process, the potential indirect impact of raw materials or more important to the quality of products. Select a suitable hose by corrosive media, you can ensure the corrosion resistance of the High pressure steel wire braided hose.
Class C material: generally refers to aid, General or low impact on product quality of raw materials.
Since the production of the main parts of the high pressure rubber hose is stainless steel, which ensures steel wire spiral rubber hose excellent heat resistance and corrosion resistance, the hose very wide operating temperature range, is -196-600 degrees.
High pressure hydraulic hose Scope: the need for adequate flexible delivery tube to prevent vibration premises piping, steam, gas, air, heavy oil, petroleum, chemical-pharmaceutical etc. apply.
Metal hose with a good flexibility, fatigue resistance, high pressure, high temperature resistance, corrosion resistance, and many other features, so it is also has high economic benefit. With the development of modern industry, For high temperature, high pressure of demand for corrugated metal hoses also getting bigger and bigger.
HEBEI EILIFEN rubber co., LTD  provides high quality rubber hose for you.
Related Reading: high pressure hydraulic hose , high pressure hydraulic hose , High pressure steel wire braided hose

High pressure rubber hose how to shop

Buy high pressure rubber hose for chemical industry is a big deal, but how do you select the right pressure testing hose, HEBEI EILIFEN rubber co., LTD-pressure hose experts teach your eight to choose from!

High pressure steel wire spiral rubber hose

1, there is no product certification

Authentic products are the State quality and technical supervision Department chemical products quality inspection stations and certified after passing the production factory, the granting of the certificate of inspection, instructions, and installation considerations, if not for fake and shoddy products.

2, see model specifications

When choosing a large diameter rubber hose, to see whether the specifications meet the application requirements. Some look similar in appearance, but a little attention can't be used to buy back.

3, see no Assembly marking

Authentic products Assembly marks are very clear and obvious. If the timing gear marks, tags should be well clear at the top of the piston. No marks must not be used.

4, has no rust

Some accessories as storage time is too long, causing aging, discoloration, deformation, corrosion, oxidation, and so on. If the above cannot be purchased.

5, see no cracks

Fake steel wire spiral rubber hose products from the appearance point of view, finish lower, and there are obvious cracks, sand, slag, Burr defects likely to cause oil spills, leaking gas leakage fault.

6, see color

Manufacturer original products, surface treatment are relatively fixed, uniform provides color, generally experienced visually you can see at a glance what's real.

7, see appearance

Authentic product packaging of high quality and products are subject to rust-proof, waterproof, anti-corrosion treatment, packed and in the obvious location for product names, specifications, types, quantity and name. Parts of this Assembly used better paper cartons, and set in a plastic bag in fake and shoddy products packaging rough poor.

8, see trademarks and weight

When buying high pressure rubber hose, be sure to brand awareness, choose the regular brand products.

When choosing a high pressure hose price, use a hand weigh, fake parts are cutting corners, light weight, small size, attention should be identified.

HEBEI EILIFEN rubber co., LTD-pressure measuring hose and hose accessories brand, the chemical friends good helper!  http://www.eilifen.com/

Related Reading: high pressure hydraulic hose , high pressure hydraulic hose , High pressure steel wire braided hose